|
 Brick
Production Process :
1.
APRON FEEDER (Metallic Silo): Clay stored
conveyed into the production-line via Apron Feeder (Steel Silo).
 First Belt Conveyor:
Among sufficient water is sprayed to moving clay, wet clay is conveyed
toward the first waltz by Belt Conveyor Waltz.
2. MILL: Mill
crushes wet clay and conveys smooth and integrated clay onto the second
conveyor.
3. Mixer (simple mixer):
Hence the clay is led into the mixer that makes mud. At this stage in
which the humidity shortage is settled, the prepared mud is conveyed on
the third conveyor. Therefore it is delivered to the second waltz.
4. Waltz: It
makes the mud smoother, then the layers of mud are led into the press
mixer through the forth conveyor.
5. PRESS MIXER:
So while the end provision is done, the mud is injected into the Press.
6. PRESS VACUUM PUMP:
On press in driving of the mud, bubble of mud is taken in vacuumed
process and mud get out from the press mould nozzle, meanwhile squeezed.
7. SINGLE CUTTER:
Process continued and ultimately, the out bars in form of two bars cuts
with regulate length by single cutter and it is led to the group
cutters.
8. MULTIPLE CUTTERS:
Multiple cutters cut the bar into 50 pieces per cutting .At the end, the
produced mud bricks unloaded in a vast area to dry.
   |
